Wrap & Pack Guide

Printers

Follow our packing guide below to ensure your printer makes it to our facilities safely.

Step 1

Upon receiving the requested custom box, please inspect its contents. Along with the box, you should receive a roll of tape, XX sheets of bubble wrap, printed return options and a return shipping label.

Step 2

Place the laser printer on a clean, level surface. Open the laser printer and carefully remove the toner cartridge and place it in a separate plastic bag. All laser printers should have the toner cartridge removed and packaged separately prior to shipping.

Step 3

Measure and assemble a large box deep enough to accommodate the laser printer and toner cartridge. Ensure that the box has no visible damage on the outside. All existing labels, markings and graphics should be blacked out or removed.

Step 4

Use bubble wrap, crisscrossed across the center of the box to provide padding to the laser printer.

Step 5

Carefully slide the laser printer into the box, until it reaches the bottom. Fold in the excess bubble wrap and place the toner cartridge on the side of the box.

Step 6

Use additional bubble wrap to ensure that nothing inside the package will be moving while it’s in transit The fit of all components inside the box should be snug.

Replace label with new outgoing one

Step 7

Your box is ready to be shipped! Use the return options on the sheet included in your package to either schedule a pickup or find a drop off location.